Momentum and CollisionHard
Question
A copper wire of length 3m and area of cross -section 1 mm2, passes through an arrangement of two frictionless pulleys, P1 and P2. One end of the wire is rigidly clamped and a mass of 1 kg is hanged from the other end. If the Young′s modulus for copper is 10 × 1010 N/m2, then the elongation in the wire is -
Options
A.0.05 mm
B.0.1 mm
C.0.2 mm
D.0.3 mm
Solution
Tension in wire = mg = 10N
so elongation
= 0.3 mm
so elongation
= 0.3 mmCreate a free account to view solution
View Solution FreeMore Momentum and Collision Questions
A body A of mass M while falling vertically downwards under gravity breaks into two parts; a body B of mass 1/3 M and a ...The angular speed of a body changes from ω1 TO ω2 without appling of inertia. the ratio of radii of gyration i...Water rises to a height of 16.3 cm in a capillary of height 18 cm above the water level. If the tube is cut at a height ...During blood transfusion the needle is inserted in a vein where the gauge pressure is 2000 Pa. At what height must the b...A cubical block of wood of side 10 cm floats at the interface between oil and water as shown in the figure with its lowe...