Current Electricity and Electrical InstrumentHard
Question
In a potentiometer arrangement E1 is the cell establishing current in primary circuit E2 is the cell to be measured. AB is the potentiometer wire and G is a galvanometer. Which of the following are the essential condition for balance to be obtains
Options
A.The emf of E1 must be greater than the emf of E2
B.Either the positive terminals of both E1 and E2 or the negative terminals of both E1 and E2 must be joined to one end of potentiometer wire
C.The positive terminals of E1 and E2 must be joined to one end of potentiometer wire
D.The resistance of G must be less than the resistance of AB
Topic: Current Electricity and Electrical Instrument·Practice all Current Electricity and Electrical Instrument questions
More Current Electricity and Electrical Instrument Questions
In the circuit shown the readings of ammeter and voltmeter are 4A and 20V respectively. The meters are non-ideal, then R...When current in a coil changes from 5 A to 2 A in 0.1 s, average voltage of 50V is produced. The self -inductance of the...A virtual current 4A and 50 Hz flows in an circuit containing a coil the power consumed in the coil is 240 W. If the vir...n identical cells are joined in series with its two cells A and B in the loop with reversed polarities. EMF of each cell...In figure a meter-bridge is shown in its balance position. If the resistance of the wire of meterbridge is 1.0 ohm/cm th...